How To Power A Bulb Using Two Pencils
1. Two pencils
4. Battery and battery connector
Attache your switch to the bottom of you battery as shown in the picture.
Pick your battery connector and connect it to the battery. Make sure the connection is firm.
Solder the positive terminal of the battery to one of the switch terminal. Connect a cable to the other terminal of the switch.
Pick up your pencils, sharpened at both ends as shown in the picture below
then attach each pencils to the side of the battery and glue it
Connect your LED to the pointed part of the pencil and glue as shown in the picture below.
Connect the free cables to each pencils,make sure your connection is firm.
After that switch it on and watch your LED glow.
Also Follow us on Facbook, Twitter, Instagram For Give Away!